SACMI FMP‑267/109.2 roller kiln

TECHNICAL DATA – SACMI ROLLER KILN

Brand: SACMI
Model: FMP‑267/109.2
Serial number: 121187
Year of manufacture: 2004

Main Dimensions
• Width between walls: 2,645 mm
• Width between roller supports: 2,650 mm
• Roller pitch (inlet/outlet): 67.7 mm
• Roller pitch (firing zone): 65 mm
• Roller diameter: 45 mm

Categoría: Marca:

Descripción

Thermal Characteristics
• Fuel type: Natural gas
• Lower heating value: 9,200 kcal/Nm³
• Gas pressure: 2.5 bar
• Maximum thermal power: 5,880 kW
• Operating temperature: 1,220 °C
• Maximum temperature: 1,250 °C

Production & Process
• Material processed: Ceramic material (firing)
• Maximum production capacity: 7,000 kg/h
• Internal atmosphere: Oxidizing
• Minimum air‑change cycles: 3
• Maximum internal pressure: 0.02 mbar

⚡ Electrical Panel – General Data
(Extracted from the electrical documentation section)
Main Power Supply
• Rated voltage: 400 V
• Phases: 3 + PE
• Frequency: 50 Hz
• Installed power: 221 kW
• Nominal current: 443 A
• Short‑circuit withstand capacity: 30 kA
• Recommended cable section (Cu): 175 mm²

Emergency Power Supply
• Rated voltage: 400 V
• Phases: 3 + PE
• Frequency: 50 Hz
• Nominal current: 224 A
• Maximum load current: 251 A

No hay valoraciones aún.

Sé el primero en valorar “SACMI FMP‑267/109.2 roller kiln”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *